What Size Power Station Do I Need for a TV?
A TV is a moderate, predictable load with minimal surge. Sizing is straightforward — it comes down to your TV's wattage and how long you want to watch. This page covers the factors that change a TV's power draw and gives you a quick calculator.
Most modern LED TVs draw 50–150 W depending on size and brightness. A 500 Wh power station can run a 100 W TV for roughly 4 hours. For a movie night or tailgate, 500–1,000 Wh is typically plenty.
Calculate Your Exact Size
Preconfigured for tv. Adjust the values below, then calculate.
Typical Power Requirements
| Specification | Typical Range |
|---|---|
| Running watts (W) | 40–200 W |
| Default runtime scenario | 4h |
These are planning ranges only. For the most accurate result, check the appliance label or manufacturer's specification and enter the actual wattage in the calculator above.
Key Considerations
- Screen size is the biggest factor: a 32-inch LED TV might draw 40 W, while a 65-inch can draw 120–180 W. OLED TVs are generally more efficient than similarly-sized LED TVs at typical brightness.
- Brightness settings matter — a TV at full brightness in a bright room draws more than the same TV at moderate brightness in a dark room.
- TVs have essentially no startup surge — the inverter requirement is just the running wattage. Any power station with 150+ W of AC output can handle a typical TV.
- If you're also powering a streaming stick, soundbar, or antenna amplifier, add their wattage to the TV's.
Runtime Examples
About 4 hours of viewing after efficiency losses — enough for a movie night or a tailgate.
About 8 hours — a full evening of TV plus margin, or enough to also charge phones and run a soundbar.
Solar Considerations
- A 100 W solar panel can offset a TV's daytime consumption, but TVs are typically used in the evening when solar isn't producing. Focus on battery capacity.
- For outdoor movie nights, a 500 Wh station is usually enough — you don't need solar for a one-time event.
Your Power Station Recommendation
Based on the preconfigured tv scenario. Calculate above for recommendations tailored to your exact setup.
Buying Considerations
- You don't need a large inverter for a TV — 200 W of AC output is plenty for most TVs plus a soundbar.
- Focus on capacity (Wh) for your desired viewing time rather than surge/output rating.
- If you're setting up an outdoor theater, remember to account for a streaming device, projector (which draws more), or sound system.